Suzuki Madura GV700GL Service Manual page 41

3-11 ENGINE SERVICING
ENGINE REINSTALLATION
Reinstall the engine in the reverse order of engine
removal.
• Before mounting the engine, install the exhaust
pipes for rear cylinders.
• Place the engine in the proper position and
install the right down tube to the frame.
• Engage the engine to the drive shaft.
• After inserting the engine mounting bolts,
tighten the engine mounting bracket bolts and
engine mounting bolts.
Insert the all upper long bolts from left side and
bottom lower bolt from the right side. Install
the brackets, bolts and nuts properly as shown
in the following illustration.
CAUTION:
The engine mounting nuts are self-lock nuts.
Once the nut has been removed, it is no longer
of any use. Be sure to use new nuts and
tighten them to the specified torque.
Tightening torque
Item
N-m
CD,®
60-72
@
@
60-65
@
30-35
®
18-28
kg-m
lb-ft
6.0-7.2 43.5-52.0
6.0-6.5
43.5-47.0
3.0-3.5
21.5-25.5
1.8-2.8 13.0-20.0