Suzuki Madura GV700GL Service Manual page 97

3-67 ENGINE SERVICING
• Coat SUZUKI Bond No. 1207B lightly to the
portion around mating surface between upper
and lower crankcases as shown.
99104 · 31140
I
SUZUKI BOND No. 1207B
I
• Install the secondary gear case to the
crankcase.
NOTE:
Make sure that clutch push rod is installed
properly.
• Apply SUZUKI Bond No. 1207B.to the securing
bolt®.
99104 · 31140
I
SUZUKI Bond No. 1207B
I
• Install the two positioning pins and a new gasket.
• Tighten the generator cover bolts with 8-mm
box wrench.
• Hold the two camshaft drive chains and engage
the two chains to the idler shaft sprockets
properly.