7: Using The Submeter; Introduction; A: Understanding Submeter Face Elements - Electro Industries Shark 100S Installation & Operation Manual

7: Using the Submeter

7.1: Introduction

The Shark® 100S submeter can be configured and a variety of functions can be
accomplished by using the Elements and the Buttons on the submeter face. This
chapter reviews front panel navigation. See Appendix A for complete Navigation
maps.

7.1.A: Understanding Submeter Face Elements

Reading
Type
Indicator
IrDA Com
Port
% of Load
Bar
The meter face features the following elements:
• Reading Type Indicator: e.g., Max
• Parameter Designator: e.g., Volts L-N
• Watt-Hour Test Pulse: Energy pulse output to test accuracy
• Scaling Factor: Kilo or Mega multiplier of displayed readings
• % of Load Bar: Graphic Display of Amps as % of the Load (Refer to Section 7.3 for
additional information.)
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
MENU ENTER
MAX
MIN
-
LM1
LM2
%THD
0000
PRG
-
lrDA
120%-
-
90%-
60%-
30%-
%LOAD
Figure 7.1: Faceplate with Elements
Doc
7: Using the Submeter
VOLTS L-N
Parameter
VOLTS L-L
Designator
AMPS
A
WNARP
VA/Hz
Wh
VARh
B
VAh
Watt-hour
C
Test Pulse
Wh Pulse
Scaling
KILO
Factor
MEGA
E145721
#
7 - 1