Table of Contents
Advertisement
8. Valid Communication Settings are as follows:
COM1
Response Delay
COM2
Address
Protocol
Baud Rate
Response Delay
DNP Options for Voltage, Current, and Power - these fields allow you to choose
Primary or Secondary Units for DNP, and to set custom scaling if you choose
Primary. See Chapter 5 in the Communicator EXT User Manual for more
information.
9. When changes are complete, click the Update Device button to send the new
profile to the meter.
10. Click Exit to leave the Device Profile or click other menu items to change other
aspects of the Device Profile (see following section for instructions).
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
(IrDA)
(0-750 msec)
(RS485)
(1-247)
(Modbus RTU, Modbus ASCII or DNP)
(9600 to 57600)
(0-750 msec)
Doc
5: Communication Installation
E145721
#
5 - 10
Advertisement
Table of Contents
