Table of Contents
Advertisement
6. You will see the Shark® 100S meter's Device Profile screen. The tabs at the top of
the screen allow you to navigate between settings screens (see below).
7. Click the Communications tab. You will see the following screen. Use this screen
to enter communication settings for the meter's two on-board ports: the IrDA port
(COM 1) and RS485 port (COM 2) Make any necessary changes to settings.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
5: Communication Installation
Doc
E145721
#
5 - 9
Advertisement
Table of Contents
