Table of Contents
Advertisement
• To enter a number value, use the Down button to select the number value for a
digit and the Right button to move to the next digit.
NOTE: When you try to change the current setting and Password protection is
enabled for the meter, the Password screen appears. See Section 7.2.4 for instruc-
tions on entering a password.
7. Once you have entered the new setting, press the Menu button twice.
8. The Store ALL YES screen appears. You can either:
• Press the Enter button to save the new setting.
• Press the Right button to access the Store ALL no screen; then press the Enter
button to cancel the Save.
9. If you have saved the settings, the Store ALL done screen appears and the meter
resets.
MENU
ENTER
-
-
-
Press the Enter button to save
the settings. Press the Right
button for Stor All no screen.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
MENU
-
A
-
B
-
C
Press the Enter button to
Cancel the Save.
Doc
7: Using the Submeter
MENU
ENTER
-
A
-
B
-
C
The settings have been
saved.
E145721
#
ENTER
A
B
C
7 - 8
Advertisement
Table of Contents
