Table of Contents
Advertisement
6.3.2: Configuring the Ethernet Adapter
1. From the PC's Start Menu, select Settings>Network Connections or Control
Panel>Network Connections. You will see a screen like the one shown below.
2. Right click on the Local Area Network connection you will be using to connect to the
Shark® 100S submeter, and select Properties from the pull-down menu. You will
see the screen shown on the next page.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
6: Ethernet Configuration
Doc
E145721
#
6 - 5
Advertisement
Table of Contents
