Installing The Amd Firepro S9150 Gpu Enablement Kit - HPE ProLiant XL270d Gen9 User Manual

18. If installing GPUs into slots 7 and 8, repeat the procedure on the other side of the server.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays are
populated with either a component or a blank.
19. Install the side panel.
20. Install the access panel.
21. Install the server into the chassis.
22. Connect all peripheral cables to the server .
23. Power up the server .

Installing the AMD FirePro S9150 GPU enablement kit

About this task
Depending on the existing server configuration, some or all of the following procedures may apply.
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website .
To install the component:
Procedure
1. Back up all server data.
2. Power down the server .
3. Disconnect all peripheral cables from the server front panel.
4. Remove the server from the chassis.
5. Place the server on a sturdy, level surface.
6. Remove the access panel.
7. Remove the side panel.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays are
populated with either a component or a blank.
94 Installing the AMD FirePro S9150 GPU enablement kit