HPE ProLiant XL270d Gen9 User Manual page 57

9. Remove the air baffle.
IMPORTANT:
Remove all GPUs, GPU blanks, and expansion boards before removing the PCI riser modules.
10. Remove the side panel.
11. Remove all GPUs:
a. Loosen the captive screw.
b. Using both hands, gently pull the tab and the rear support bracket to slide out the GPU to access the
power cable.
c. Disconnect the power cable from the GPU, and then remove the GPU from the server.
12. Remove all GPU blanks:
a. Loosen the captive screw.
b. Using both hands, gently pull the tab and the rear of the GPU blank.
Hardware options installation 57