Removing The Drive Cage Assembly - HPE ProLiant XL270d Gen9 User Manual

3. If a Smart Storage Battery is installed, reconnect the cable to the riser board.
4. Install the access panel.
5. Install the server into the chassis.
6. Connect all peripheral cables to the server.
7. Power up the server .

Removing the drive cage assembly

Procedure
1. Back up all server data.
2. Power down the server .
3. Disconnect all peripheral cables from the server .
4. Remove the server from the chassis .
5. Place the server on a sturdy, level surface.
6. Remove the access panel.
7. Remove the air baffle.
Removing the drive cage assembly 29