a. Loosen the captive screw.
b. Using both hands, gently pull the tab and the rear support bracket to slide out the GPU to access the
power cable.
c. Disconnect the power cable from the GPU, and then remove the GPU from the server.
10. If the existing GPU power cables do not support the NVIDIA K80/M40/P40/P100 GPUs, remove the
cables from the server:
a. Remove the screws to release the retention springs. Keep the screws for later use.
b. Release the long GPU power cables from the clip.
c. Disconnect the power cables from the power distribution board.
•
Long GPU power cables
•
Short GPU power cables
Hardware options installation
89