Enabling The Dedicated Ilo Management Module; Hp Trusted Platform Module Option - HPE ProLiant XL270d Gen9 User Manual

Enabling the dedicated iLO management module

About this task
The onboard NIC 1/shared iLO connector is set as the default system iLO connector. To enable the dedicated
iLO management module, use the iLO 4 Configuration Utility accessible within the UEFI System Utilities.
For more information on the UEFI System Utilities, see the UEFI documentation on the Hewlett Packard
Enterprise website.
IMPORTANT:
If the iLO configuration settings are reset to the default values, remote access to the machine will be
lost. Access the physical machine and repeat the procedure described in this section to re-enable the
dedicated iLO management connector.
To enable the dedicated iLO management module:
Procedure
1. During the server startup sequence after installing the module, press F9 in the POST screen.
The System Utilities screen appears.
2. Select System Configuration | iLO 4 Configuration Utility.
The iLO 4 Configuration Utility screen appears.
3. Select Network Options, and then press Enter.
The Network Options screen appears.
4. Set the Network Interface Adapter field to ON, and then press Enter.
5. Press F10 to save your changes.
A message prompt to confirm the iLO settings reset appears.
6. Press Enter to reboot the iLO settings.
7. Press Esc until the main menu is displayed.
8. Select Reboot the System to exit the utility and resume the boot process.
The IP address of the enabled dedicated iLO connector appears on the POST screen on the subsequent
boot-up. Access the Network Options screen again to view this IP address for later reference.

HP Trusted Platform Module option

For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website .
Use these instructions to install and enable a TPM on a supported server . This procedure includes three
sections:
1. Installing the Trusted Platform Module board.
2. Retaining the recovery key/password.
3. Enabling the Trusted Platform Module.
Enabling the TPM requires accessing BIOS/Platform Configuration (RBSU) in the UEFI System Utilities.
TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker
Drive Encryption feature. For more information on BitLocker, see the Microsoft website.
CAUTION:
Always observe the guidelines in this document. Failure to follow these guidelines can cause hardware
damage or halt data access.
Enabling the dedicated iLO management module 107