HPE ProLiant XL270d Gen9 User Manual page 98

d. Reinstall the accelerator cover.
12. To install the long GPU power cables for slots 1 and 2, do the following:
a. Route the long GPU power cables into the server.
b. Connect the power cables to the power distribution board.
c. Secure the power cables in the clip.
d. Install and secure each retention spring with a screw.
e. To install the long GPU power cables for slots 5 and 6, repeat the procedure on the other side of the
server.
13. To install the short GPU power cables for slots 3 and 4, do the following:
a. Route the short GPU power cables into the server.
b. Connect the power cables to the power distribution board.
c. Install and secure the retention springs for both cables with the screw.
98 Hardware options installation