Table of Contents
Advertisement
Install the power supply into the bay until it clicks.
4.
Connect the power cord to the power supply.
5.
Route the power cord through the cable management solution.
6.
Connect the power cord to the power source.
7.
Be sure that the power supply LED is green.
8.
Installing the 8X SFF Smart Array enablement
option
Power down the server (on page 14).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server from the chassis (on page 14).
3.
Remove all shipping brackets.
4.
Hardware options installation 58
Advertisement
Table of Contents
