Rear Panel Components; Power Fault Leds - HPE ProLiant XL270d Gen9 User Manual

Item Description
6
iLO link LED
7 NIC link LED
8 NIC activity LED
1
When the LEDs described in this table flash simultaneously, a power fault has occurred. For more
information, see Power Fault LEDs.
2
Facility power is not present, power cord is not attached, no power supplies are installed, power supply
failure has occurred, or the front I/O cable is disconnected.
3
If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the
system health status.

Rear panel components

Item
1
2
3

Power fault LEDs

The following table provides a list of power fault LEDs, and the subsystems that are affected. Not all power
faults are used by all servers.
1
1
Description
Fan connectors
Management riser connector
DC power cable module connectors
Status
Green = Linked to network
Off = No network connection
Green = Linked to network
Off = No network connection
Green or flashing green = Network activity
Off = No network activity
Rear panel components 9