c. Install the GPUs and tighten the thumbscrews.
17. If installing GPUs into slots 7 and 8, repeat the procedure on the other side of the server.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays are
populated with either a component or a blank.
18. Install the side panel.
19. Install the access panel.
20. Install the server into the chassis.
21. Connect all peripheral cables to the server .
22. Power up the server .
Installing the NVIDIA K80/M40/P40/P100 GPU enablement Kit
About this task
Depending on the existing server configuration, some or all of the following procedures may apply.
Installing the NVIDIA K80/M40/P40/P100 GPU enablement Kit
87