Huawei Quidway S3700 Series Configuration Manual page 135

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
l
l
l
Switch provides power for Switch A, Switch B, and the AP in automatic mode.
Figure 9-1 Networking diagram of PoE configurations
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
Configuration Procedure
1.
Issue 01 (2011-07-15)
Switch A is connected to Ethernet 0/0/1 on the Switch; the maximum power consumption
of Switch A is 12000 mw; Switch A is connected to the data server and needs to be powered
first.
Switch B is connected to Ethernet 0/0/2 on the Switch; the maximum power consumption
of Switch B is 20000 mw; Switch B is connected to common Internet access users.
The AP is connected to Ethernet 0/0/3 on the Switch; the maximum power consumption
of the AP is 2500 mw; the AP is connected to wireless users.
Ethernet0/0/1
SwitchA
Enable PoE on Ethernet 0/0/1 of the Switch, and set the maximum power and the power
supply priority of Ethernet 0/0/1.
Enable PoE on Ethernet 0/0/2 of the Switch, and set the maximum power consumption of
Ethernet 0/0/2.
Enable PoE on Ethernet 0/0/3 of the Switch, and set the maximum power consumption of
Ethernet 0/0/3.
Set the power supply mode of the Switch to automatic.
Number of each interface on which PoE needs to be enabled
Maximum power consumption of each interface
# Enable PoE on Ethernet 0/0/1 of the Switch, and set the maximum power and the power
supply priority of Ethernet 0/0/1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Switch
Ethernet0/0/3
Ethernet0/0/2
SwitchB
9 PoE Configuration
AP
125