Restarting The S3700 Immediately Through Command Lines; Restarting The S3700 By Pressing The Power Button On The S3700; Restarting The S3700 At A Fixed Time - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management

11.2.1 Restarting the S3700 Immediately Through Command Lines

Context
The reboot command can paralyze the network for a while. Therefore, run the reboot command
with caution.
Before restarting the S3700, check whether to save the configuration file and whether the file
contents are correct. For details on saving the configuration file, refer to the Quidway S3700
Series Ethernet Switches Configuration Guide - Basic Configuration.
Procedure
Step 1 Run:
reboot
The S3700 is restarted immediately.
----End
11.2.2 Restarting the S3700 by Pressing the Power Button on the
S3700
Context
The action can paralyze the network for a while. Therefore, perform this action with caution.
Before restarting the S3700, check whether to save the configuration file and whether the file
contents are correct. For details on saving the configuration file, see the Quidway S3700
Series Ethernet Switches Configuration Guide - Basic Configuration.
Procedure
Step 1 Press the power button on the S3700 to power off the running S3700.
Step 2 Press the power button on the S3700 again to restart the S3700.
----End

11.3 Restarting the S3700 at a Fixed Time

This section describes how to restart the S3700 at a fixed time.
Issue 01 (2011-07-15)
CAUTION
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Restarting and Resetting
139