Huawei Quidway S3700 Series Configuration Manual page 119

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
Figure 8-6 Networking diagram of local MAC address mirroring
PC1
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
None.
Configuration Procedure
1.
2.
3.
4.
Issue 01 (2011-07-15)
Eth1/0/1
Eth0/0/4
Eth0/0/3
Eth0/0/1
Eth0/0/2
PC2
Set Ethernet 0/0/3 as an observing port.
Configure local MAC address mirroring in the view of VLAN 10.
Configure VLAN 10 and then add Ethernet 0/0/1, Ethernet 0/0/2, and Ethernet 0/0/4 to
VLAN 10. The configuration procedure is not mentioned here.
# Configure Ethernet 0/0/3 as an observing port.
<Switch> system-view
[Switch] observe-port 1 interface ethernet 0/0/3
Configure a mirroring MAC.
# Configure local MAC address mirroring in the view of VLAN 10.
[Switch] vlan 10
[Switch-vlan10] mac-mirroring 0001-0001-0001 to observe-port 1 inbound
[Switch-vlan10] quit
Verify the configuration.
# Run the display port-mirroring command to view the configuration of the observing
port.
[Switch] display port-mirroring
Mac-mirror:
----------------------------------------------------------------------
Mirror-mac
----------------------------------------------------------------------
0001-0001-0001
----------------------------------------------------------------------
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PC3
Vlan Direction
10 Inbound
Observe-port
Ethernet0/0/3
8 Mirroring
109