Optional) Changing An Observing Port; Checking The Configuration; Configuring Cpu Mirroring - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
The view of the mirrored port is displayed.
Step 3 Run:
undo port-mirroring { both | inbound | outbound }
Interface mirroring is canceled.
Step 4 Run:
quit
Return to the system view.
Step 5 Run:
undo observe-port index
The observing port is deleted.
----End

8.14.3 (Optional) Changing an Observing Port

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
observe-port index interface interface-type interface-number
Another interface is specified as an observing port.
----End

8.14.4 Checking the Configuration

Run the following commands to check the previous configuration.
Action
Check information about the
observing port.
Check information about port
mirroring.
If the observing port is deleted or a new observing port is specified, the configuration is
successful.

8.15 Configuring CPU Mirroring

This section describes how to configure CPU mirroring.
Issue 01 (2011-07-15)
Command
display observe-port
display port-mirroring
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Mirroring
101