Example For Configuring Local Flow Mirroring - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
Configuration Files
Configuration file of the Switch
#
sysname Switch
#
vlan batch 1 10
#
observe-port 1 interface Ethernet0/0/3
#
vlan 10
mac-mirroring 0001-0001-0001 to observe-port 1 inbound
#
interface Ethernet0/0/1
port link-type access
port default vlan 10
#
interface Ethernet0/0/2
port link-type access
port default vlan 10
#
interface Ethernet0/0/3
port link-type access
port default vlan 1
#
interface Ethernet0/0/4
port link-type access
port default vlan 10
#
return

8.17.4 Example for Configuring Local Flow Mirroring

Networking Requirements
As is shown in
and Ethernet 0/0/5. Packets with the same attributes received by Ethernet 0/0/1 and Ethernet
0/0/5 and transmitted from Ethernet 0/0/3 need to be monitored. In this example, packets with
the 802.1p priority as 6 need to be monitored.
Ethernet 0/0/24 is configured as an observing port.
Figure 8-7 Networking diagram of local flow mirroring
L2 Switch
Issue 01 (2011-07-15)
Figure 8-7, the Switch is connected to two L2 switches through Ethernet 0/0/1
Router
Switch Eth 0/0/3
Eth 0/0/1 Eth 0/0/24
Eth 0/0/5
L2 Switch
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Mirroring host
8 Mirroring
110