Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
No.
1
2
8.4.2 Canceling Port Mirroring
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The view of the mirrored port is displayed.
Step 3 Run:
undo port-mirroring { both | inbound | outbound }
Interface mirroring is canceled.
----End
8.4.3 Checking the Configuration
Run the following commands to check the previous configuration.
Action
Check information about the
observing port.
Check information about port
mirroring.
Run the display port-mirroring command. If port mirroring is cancelled properly, the
configuration is successful.
8.5 Configuring Local VLAN Mirroring
This section describes how to configure local VLAN mirroring.
Issue 01 (2011-07-15)
Data
Type and number of an observing port
Type and number of the mirrored port to be deleted
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Command
display observe-port
display port-mirroring
8 Mirroring
83