Checking The Configuration - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
Context
Do as follows on the S3700 that is configured with flow mirroring.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
traffic behavior behavior-name
The traffic behavior view is displayed.
Step 3 Run:
undo mirroring
The flow mirroring action is cancelled.
Step 4 Run:
quit
Exit from the traffic behavior view.
Step 5 Run:
interface interface-type interface-number
The interface view is displayed.
Step 6 Run:
undo traffic-policy inbound
The traffic policy and flow mirroring action on the interface are canceled.
To cancel a traffic policy, you must cancel the traffic policy on all the interfaces where the traffic
policy is applied, and then run the undo traffic policy policy-name command to cancel the traffic
policy in the system view.
----End

8.13.3 Checking the Configuration

Run the following commands to check the previous configuration.
Action
Check information about the
observing port.
Check information about port
mirroring.
Check the flow mirroring
configuration in the traffic policy
on an interface.
Issue 01 (2011-07-15)
Command
display observe-port
display port-mirroring
display traffic policy interface [ interface-type
interface-number ] [ inbound ]
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Mirroring
99