Table of Contents
Advertisement
®
IntesisBox
KNX - Daikin A.C. (SKY & VRV line)
3. Configuration and setup
This is a fully compatible KNX device which must be configured and setup using standard KNX
tool ETS.
ETS database for this device can be downloaded from:
http://www.intesis.com/down/eib/DK-RC-KNX-1i.zip
Please consult the README.txt file, located inside the downloaded zip file, to find instructions
on how to install the database.
IMPORTANT: Do not forget to select the correct settings of AC indoor unit being connected to
the DK-RC-KNX-1i (Fan speed and Vane), this is in "Parameters" of the device in ETS.
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
®
IntesisBox
is a registered trademark of Intesis Software SL
User's manual r1.0 eng
URL
http://www.intesis.com
Email
info@intesis.com
tel
+34 938047134
9 / 66
Advertisement
Table of Contents
Need help?
Do you have a question about the DK-RC-KNX-1i and is the answer not in the manual?
Questions and answers