Switch-Off Timeouts Configuration Dialog - IntesisBox DK-RC-KNX-1i User Manual

®
IntesisBox KNX - Daikin A.C. (SKY & VRV line)

4.8 Switch-Off Timeouts Configuration dialog

All the parameters in this section are related with the timeout properties and communication
objects.
4.8.1 Enable use of Open Window / Switch off timeout function
This parameter shows/hides the Control_ Switch Off Timeout communication object which
lets you Start/Stop a timeout to switch off the indoor unit.
If set to "no"
o
not be shown.
If set to "yes" the Control_ Switch Off Timeout object and new parameters will appear.
o
If a "1" value is sent to this object, and the indoor unit is already turned on, the switch-
off timeout will begin. If a "0" value is sent to this object, the switch-off timeout will stop.
 AC switch-off timeout (min)
This parameter lets you select how much time (in minutes) to wait before switching
off the indoor unit.
 DPT for Window / Switch-off timeout
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
®
IntesisBox is a registered trademark of Intesis Software SL
Figure 4.31 Default Switch-Off Timeouts Configuration dialog
Figure 4.32 Parameter detail
User's manual r1.0 eng
the object will
URL http://www.intesis.com
Email info@intesis.com
tel +34 938047134
41 / 66