Table of Contents
Advertisement
KNX – Mitsubishi Electric A.C.
®
IntesisBox
3. Configuration and setup
This is a fully compatible KNX device which must be configured and setup using standard
KNX tool ETS.
ETS database for this device can be downloaded from:
https://www.intesisbox.com/intesis/product/media/intesisbox_me-ac-knx-1i_ets_database.zip
Please consult the README.txt file, located inside the downloaded zip file, to find
instructions on how to install the database.
Important: Do not forget to select the correct settings of AC indoor unit being
connected to the ME-AC-KNX-1i. This is in "Parameters" of the device in ETS.
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
®
IntesisBox
is a registered trademark of Intesis Software SLU
User's manual r2.3 eng
URL
http://www.intesisbox.com
Email
info@intesisbox.com
tel
+34 938047134
8 / 63
Advertisement
Table of Contents
Need help?
Do you have a question about the ME-AC-KNX-1i and is the answer not in the manual?