IntesisBox DK-RC-KNX-1i User Manual page 40

®
IntesisBox KNX - Daikin A.C. (SKY & VRV line)
 Scene "x" / Value for On-Off
This parameter lets you choose the power of the indoor unit when the scene is
executed. The following options are available: "ON", "OFF" or "(unchanged)".
 Scene "x" / Value for Mode
This parameter lets you choose the mode of the indoor unit when the scene is
executed. The following options are available: "AUTO", "HEAT", "COOL", "FAN",
"DRY", or "(unchanged)".
 Scene "x" / Value for Fan Speed
This parameter lets you choose the fan speed of the indoor unit when the scene is
executed. The following options are available: "SPEED 1", "SPEED 2", "SPEED 3",
or "(unchanged)".
 Scene "x" / Value for Vane Up-Down
This parameter lets you choose the vane position of the indoor unit when the scene is
executed. The following options are available: "POSITION 1", "POSITION 2",
"POSITION 3", "POSITION 4", "POSITION 5", "SWING" or "(unchanged)".
 Scene "x" / Value for Setp Temp (ºC)
This parameter lets you choose the setpoint temperature of the indoor unit when the
scene is executed. The following options are available: from "16ºC" to "32ºC" (both
included), or "(unchanged)".
 Scene "x" / Value for Remote Lock
This parameter lets you choose the remote controller status of the indoor unit when
the scene is executed. The following options are available: "locked", "unlocked", or
"(unchanged)".
Important: If any preset value is configured as "(unchanged)", the execution of
this scene will not change current status of this feature in the AC unit.
Important: When a scene is executed, Status_ Current Scene object shows the
number of this scene. Any change in previous items does Status_ Current Scene show
"No Scene". Only changes on items marked as "(unchanged)" will not disable
current scene.
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
®
IntesisBox is a registered trademark of Intesis Software SL
User's manual r1.0 eng
URL http://www.intesis.com
Email info@intesis.com
tel +34 938047134
40 / 66