Enable Use Of Text Object For Fan Speed; Enable Use Of Legacy_ Obj For Fan Speed - IntesisBox DK-RC-KNX-1i User Manual

®
IntesisBox KNX - Daikin A.C. (SKY & VRV line)
If set to "no" the objects will not be shown.
o
If set to "yes" the Status_ Fan Speed objects for Speed 1, Speed 2 and Speed 3 (if
o
available) will appear. When a Fan Speed is enabled, a "1" value is returned through its
bit-type object.

4.4.6 Enable use of Text object for Fan Speed

This parameter shows/hides the Status_ Fan Speed Text communication object.
If set to "no" the object will not be shown.
o
If set to "yes" the Status_ Fan Speed Text object will appear. Also, in the parameters,
o
will be shown two (or three, depending on the number of fan speeds selected) text fields,
one for each Fan Speed, that will let modify the text string displayed by the Status_ Fan
Speed Text when changing a fan speed.

4.4.7 Enable use of Legacy_ obj for Fan Speed

This parameter shows/hides the Legacy_ Fan Speed communication object.
If set to "no" the object will not be shown.
o
If set to "yes" the Legacy_ Fan Speed object will appear. This object lets change the
o
indoor unit Fan Speed but it uses a different data type. It is used to maintain compatibility
with old gateway models.
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
®
IntesisBox is a registered trademark of Intesis Software SL
Figure 4.15 Parameter detail
User's manual r1.0 eng
URL http://www.intesis.com
Email info@intesis.com
tel +34 938047134
27 / 66