Table of Contents
Advertisement
®
IntesisBox
KNX - Daikin A.C. (SKY & VRV line)
4. ETS Parameters
When imported to the ETS software for the first time, the gateway shows the following default
parameter configuration:
With this configuration it's possible to send On/Off (Control_ On/Off), change the AC Mode
(Control_ Mode), the Fan Speed (Control_ Fan Speed) and also the Setpoint Temperature
(Control_ Setpoint Temperature). The Status_ objects, for the mentioned Control_ objects,
are also available to use if needed. Also objects Status_ AC Reference Temp, Status_
Error/Alarm and Status_Error Text Code are shown.
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
®
IntesisBox
is a registered trademark of Intesis Software SL
Figure 4.1 Default parameter configuration
Figure 4.2 Default communication objects
User's manual r1.0 eng
URL
http://www.intesis.com
Email
info@intesis.com
tel
+34 938047134
10 / 66
Advertisement
Table of Contents
Need help?
Do you have a question about the DK-RC-KNX-1i and is the answer not in the manual?
Questions and answers