Display Interface Aux - HP MSR series Command Reference Manual

Hide thumbs Also See for MSR series:
Table of Contents

Advertisement

Field
Protocol
Main IP
Description
Cause

display interface aux

Use display interface aux to display information about AUX interfaces.
Syntax
display interface [ aux ] [ brief [ down | description ] ] [ | { begin | exclude | include }
regular-expression ]
display interface aux interface-number [ brief [ description ] ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: Displays information about a specified AUX interface.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about interfaces in the DOWN state and the causes. If you do not specify
this keyword, this command displays information about interfaces in all states.
description: Displays complete interface descriptions. If you do not specify this keyword, the command
displays only the first 27 characters of interface descriptions.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify the aux keyword, this command displays information about all interfaces on the
device.
Description
Protocol connection state of the interface, which can be UP,
DOWN, or UP(s).
Main IP address of the interface.
Description of the interface.
Cause of a DOWN physical link. If the port has been shut down
with the shutdown command, this field displays Administratively.
To restore the physical state of the interface, use the undo
shutdown command.
58

Advertisement

Table of Contents
loading

Table of Contents