Pin Modify; Pin Unlock - HP MSR series Command Reference Manual

Parameters
time: Interval of waiting for the response from the 3G/4G mode, in the range of 1 to 300 seconds. The
default is 10 seconds.
threshold: Maximum times that the 3G/4G modem does not respond AT commands, in the range of 0
to 10. The default is 3. When the threshold is set to 0, the automatic resetting function is disabled.
Examples
# Set the interval of waiting for the response from the 3G/4G modem to 20 seconds and a maximum of
four times that the 3G/4G modem does not respond.
<Sysname> system-view
[Sysname] interface cellular 0/0
[Sysname-Cellular0/0] modem response timer 20 auto-recovery 4
Related commands
modem auto-recovery enable

pin modify

Use pin modify to change the PIN of the SIM/UIM card. The new PIN is saved on the SIM/UIM card.
Syntax
pin modify current-pin new-pin
Views
Cellular interface view, cellular Ethernet interface view
Default command level
2: System level
Parameters
current-pin: Personal Identification Number (PIN) of the SIM/UIM card inserted into the modem,
comprising four to eight digits.
new-pin: New PIN to be set, comprising four to eight digits.
Examples
# Change the PIN.
<Sysname> system-view
[Sysname] interface cellular 0/0
[Sysname-Cellular0/0]pin modify 1234 4321
Warning: PIN will be changed to "4321". Continue? [Y/N]:y
PIN has been changed successfully.

pin unlock

Use pin unlock to unlock the PIN of the SIM/UIM card inserted into the modem and set a new PIN.
Syntax
pin unlock puk new-pin
Views
Cellular interface view, cellular Ethernet interface view
106