Atm E3/T3 Interface Configuration Commands; Cable; Clock - HP MSR series Command Reference Manual

Examples
# Enable payload scrambling on ATM interface 1/0.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0] scramble

ATM E3/T3 interface configuration commands

The following matrix shows the interface and router compatibility:
Interface
ATM
E3/T3

cable

Use cable to configure the cable mode of the ATM T3 interface.
Use undo cable to restore the default.
Syntax
cable { long | short }
undo cable
Default
Short haul mode applies.
Views
ATM T3 interface view
Default command level
2: System level
Parameters
long: Long haul mode, with cable length in the range of 151 to 500 m (495 to 1640 ft).
short: Short haul mode, with cable length in the range of 0 to 150 m (0 to 495 ft).
Examples
# Set the cable mode of ATM T3 interface 1/0 to long haul.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0] cable long

clock

Use clock to set the clock mode of the ATM E3/T3 interface.
Use undo clock to restore the default.
MSR900 MSR93X
No No
MSR20-1X MSR20
No No
249
MSR30 MSR50
Yes Yes
MSR1000
No