Interface Atm; Reset Atm Interface - HP MSR series Command Reference Manual

interface atm

Use interface atm to enter ATM interface view or DSL interface view.
Syntax
interface atm interface-number
Views
System view
Default command level
2: System level
Parameters
interface-number: ATM or DSL interface number.
Examples
# Enter ATM 1/0 interface view.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0]

reset atm interface

Use reset atm interface to clear the statistics on the PVCs created on an ATM interface or all the ATM
interfaces.
Syntax
reset atm interface [ atm [ interface-number ] ]
Views
User view
Default command level
1: Monitor level
Parameters
atm interface-number: Specifies an ATM interface.
Usage guidelines
If you execute this command with the value of the interface-number argument specified, this command
clears the statistics on the PVCs created on the ATM interface.
If you execute this command without specifying the value of the interface-number argument, this
command clears the statistics on the PVCs created on all the ATM interfaces.
To clear statistics on ATM interfaces, use the reset counters interface command.
Examples
# Clear the statistics on all the PVCs created on ATM 1/0 interface.
<Sysname> reset atm interface atm 1/0
233