HP MSR series Command Reference Manual page 232

Last 300 seconds input rate 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec
Last 300 seconds output rate 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec
Input: 0 packets, 0 bytes
0 errors, 0 runts, 0 giants,
0 CRC, 0 align errors, 0 overruns,
0 aborts, 0 no buffers
0 frame errors
Output:0 packets, 0 bytes
0 errors, 0 underruns, 0 collisions
0 deferred
# Display brief information about interface BRI 2/0.
<Sysname> display interface bri 2/0 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
Bri2/0
# Display brief information about all BRI interfaces in the DOWN state.
<Sysname> display interface bri brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface
Bri2/0
# Display brief information about BRI interfaces, including their complete interface descriptions.
<Sysname> display interface bri brief description
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
Bri2/0
Table 28 Command output
Field
Bri2/0 current state
Line protocol current state
Description
Link Protocol Main IP
DOWN DOWN --
Link Cause
DOWN Not connected
Link Protocol Main IP
DOWN DOWN --
Description
Physical state of the BRI interface:
•
DOWN (Administratively)—The BRI interface has been shut
down with the shutdown command.
•
DOWN—The BRI interface is physically down because no
physical link is present or the physical link has failed.
•
UP—The BRI interface is both administratively and physically
up.
Link protocol state of the interface.
Description of the interface.
223
Description
Description
The interface for connecting RouterG.