<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] clock dteclk2
code
Use code to configure the digital signal coding format on the synchronous serial interface.
Use undo code to restore the default.
Syntax
code { nrz | nrzi }
undo code
Default
The digital signal coding format t is NRZ.
Views
Synchronous serial interface view
Default command level
2: System level
Parameters
nrz: Sets the digital signal coding format to nonreturn to zero (NRZ).
nrzi: Sets the digital signal coding format to nonreturn to zero inverted (NRZI).
Examples
# Set the digital signal coding format to NRZI on synchronous serial interface 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] code nrzi
country-code
Use country-code to set the coding format of the modem connected to the AM interface.
Use undo country-code to restore the default.
Syntax
country-code area-name
undo country-code
Default
The coding format of the modem connected to the AM is united-states.
Views
AM interface view
Default command level
2: System level
51