HP MSR series Command Reference Manual page 104

0 errors, 0 runts, 0 giants
0 CRC, 0 align errors, 0 overruns
0 dribbles, 0 aborts, 0 no buffers
0 frame errors
Output:0 packets, 0 bytes
0 errors, 0 underruns, 0 collisions
0 deferred
# Display brief information about cellular Ethernet interface Cellular-Ethernet 0/0.
<Sysname> display interface cellular-ethernet0/0 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
CE0/0
# Display brief information about all cellular Ethernet interfaces in DOWN state.
<Sysname> display interface cellular-ethernet brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface
CE0/0
# Display brief information about cellular Ethernet interfaces, including their complete interface
descriptions.
<Sysname> display interface cellular-ethernet brief description
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
CE0/0
Table 19 Command output
Field
Cellular-Ethernet0/0 current state
Line protocol current state
Description
Link Protocol Main IP
DOWN UP(s) 5.5.5.5
Link Cause
DOWN Not connected
Link Protocol Main IP
DOWN UP(s) 5.5.5.5
Description
Physical state of the cellular Ethernet interface:
•
•
•
Link protocol state of the interface.
Description of the interface.
95
Description
Description
The interface for Mobile Network.
DOWN (Administratively)—The cellular Ethernet interface
has been shut down by using the shutdown command.
DOWN—The cellular Ethernet interface is physically down
because no physical link is present or the physical link has
failed.
UP—The cellular Ethernet interface is both administratively
and physically up.