Profile Main - HP MSR series Command Reference Manual

Default command level
2: System level
Parameters
profile-number: Specifies a profile number. The value range is 1 to 255.
dynamic: Enables the operator to dynamically assign an access point name based on the CHAP/PAP
username and password.
static apn: Specifies a static access point name assigned by the operator. It is a string of up to 100
characters.
authentication-mode authentication: Specifies the authentication mode, which can be none, pap, or
chap.
user username: Username assigned by the operator. It is a case-sensitive string of 1 to 32 characters.
password password: Authentication password assigned by the operator. It is a case-sensitive string of 1
to 32 characters.
Examples
# Create a parameter description profile for Cellular 0/0, specify the access point name as cmnet, and
select PAP as the authentication mode.
<Sysname> system-view
[Sysname] interface cellular 0/0
[Sysname-Cellular0/0] profile create 1 static cmnet authentication-mode pap user abc
password abc

profile main

Use profile main to specify the primary and backup profiles for 3G or 4G modem dialup.
Use undo profile main to restore the default.
Syntax
profile main profile-M-number backup profile-B-number
undo profile main
Default
Profile 1 is used for 3G or 4G modem dialup.
Views
Cellular interface view
Default command level
2: System level
Parameters
main profile-M-number: Specifies the primary profile by its number.
backup profile-B-number: Specifies the backup profile by its number.
Usage guidelines
The primary profile always has priority over the backup profile. For each dialup connection establishment,
the 3G or 4G modem uses the backup profile only when it has failed to dial up using the primary profile.
110