Description - HP MSR series Command Reference Manual

Views
ATM E1 interface view, ATM T1 interface view, ATM E3 interface view, ATM T3 interface view, ATM
OC-3c interface view, ATM STM- 1 interface view, ATM (ADSL) interface view, ATM (G.SHDSL) interface
view, EFM interface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you perform it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings of interface ATM 1/0.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0] default
This command will restore the default settings. Continue? [Y/N]:y

description

Use description to set a description for the interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of an interface is interface name Interface, for example, ATM 2/0 Interface.
Views
ATM E1 interface view, ATM T1 interface view, ATM E3 interface view, ATM T3 interface view, ATM
OC-3c interface view, ATM STM- 1 interface view, ATM (ADSL) interface view, ATM (G.SHDSL) interface
view, EFM interface view
Default command level
2: System level
Parameters
text: Interface description, a case-sensitive string of 1 to 240 characters. The description can contain
letters, digits, special characters such as tilde (~), exclamation mark (!), at sign (@), number sign (#),
dollar sign ($), percent (%), caret (^), ampersand (&), asterisk (*), brackets ({ }, ( ),[ ], < >), hyphen (-),
229