HP MSR series Command Reference Manual page 269

Syntax
display dsl configuration interface atm interface-number [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: DSL interface number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Example
# Display the actual configurations of ADSL interface ATM 1/0.
<Sysname> display dsl configuration interface atm 1/0
Line Params Set by User
Standard:
Annex:
Framing:
Coding Gain(dB):
Tx Pow Attn(dB):
Bit-Swap:
LinkCheck:
Actual Config
Standard:
Trellis Coding:
Framing:
Vendor ID:
Rate(Bytes):
Rate(kbps):
Latency:
FEC(fast):
S/D/R(Inlv):
DMT Bits Allocation Per Bin (Up/Down Bits:249/2148)
00: 0 0 0 0 0 0 7 8 a a a a 8 a b c c c b b b b b b 9 9 a a 9 8 8 0
20: 0 0 0 0 2 2 2 3 4 4 5 6 6 7 7 8 8 8 8 8 9 9 a a a a a a a 8 9 a
T1.413
A
3
Auto
0
disable
Enable
Near End Far End
T1.413 T1.413
Enable Enable
3 3
0x0039 0x0004
AS0 (DS) LS0(US)
238 26
7616 832
Intlv Intlv
0 0
1/64/16 8/8/16
260