E1 Set Frame-Format - HP MSR series Command Reference Manual

Examples
# Set the clock mode to master on E1 channel 1.
<Sysname> system-view
[Sysname] controller cpos 1/0
[Sysname-Cpos1/0] e1 1 set clock master
e1 set flag
Use e1 set flag to set the overhead bytes for an E1 channel.
Use undo e1 set flag to restore the default E1 channel overhead bytes.
Syntax
e1 e1-number set flag c2 c2-value
undo e1 e1-number set flag c2
e1 e1-number set flag j2 { sdh | sonet } j2-string
undo e1 e1-number set flag j2 { sdh | sonet }
Default
C2 is 0x02 and J2 is cyclic null.
Views
CPOS interface view
Default command level
2: System level
Parameters
e1-number: E1 channel number, in the range of 1 to 63.
c2: Specifies the low-order channel signal tag byte (C2).
c2-value: Low-order channel signal flag byte (C2) to be set, 1 byte in length and in the range of 0x0 to
0x7 (except 0x5).
j2: Specifies the low-order channel trace byte (J2).
sdh: Specifies the trace byte in SDH format.
sonet: Specifies the trace byte in SONET format.
j2-string: Low-order channel trace byte to be set, a string of 1 to 15 characters (in SDH format) or of 1 to
62 characters (in SONET format).
Examples
# Set C2 to 0x7 for the E1 channel numbered 3 of CPOS 1/0.
<Sysname> system-view
[Sysname] controller cpos 1/0
[Sysname-Cpos1/0] e1 3 set flag c2 7

e1 set frame-format

Use e1 set frame-format to set the framing format of an E1 channel.
304