HP MSR series Command Reference Manual page 88

Table 14 Command output (WCDMA mode)
Field
Model
International Mobile Subscriber Identity (IMSI)
International Mobile Equipment Identity (IMEI)
Factory Serial Number (FSN)
Modem Status
Profile Information
Profile 1
PDP Type
Header Compression
Data Compression
Packet Session Status
Current Service Status
Current Service
Description
3G modem name.
IMSI string of the SIM card.
IMEI serial number of the 3G modem.
FSN of the 3G modem.
Status of the 3G modem:
•
Online—The 3G modem is powered on.
•
Offline—The 3G modem is powered off or in low power
mode. The cellular interface is unavailable.
Parameter description template of the 3G modem.
PDP status of the 3G modem:
•
ACTIVE—The parameter description template is already
configured.
•
UNDEFINED—The parameter description template is not
configured yet. The cellular interface is not available. You
must use the profile create command to create the template,
namely, the profile.
PDP type (displayed only when Profile 1 = ACTIVE):
•
IPv4.
•
IPv6.
•
PPP (transparent transmission).
PDP header compression mode:
•
ON—Enables PDP header compression.
•
OFF—Disables PDP header compression.
PDP data compression mode:
•
ON—Enables PDP data compression.
•
OFF—Disables PDP data compression.
Packet session status:
•
Active—The 3G modem is transmitting data via PPP.
•
Inactive—The 3G modem is physically down.
Service status of the 3G modem:
•
Service available—The modem provides services normally.
•
Emergency—The modem provides limited services. The
cellular interface is unavailable.
•
No service—The modem cannot provide services. The
cellular interface is unavailable.
•
Low power—The modem is in low power mode. The
cellular interface is unavailable.
Current service type:
•
Circuit-switched—Available for the CS domain.
•
Packet-switched—Available for the PS domain.
•
Combined—Available for the CS and PS domains.
•
Invalid.
79