HP MSR series Command Reference Manual page 95

Field
Modem Status
Profile Information
Profile 1
PDP Type
Header Compression
Data Compression
Packet Session Status
Authentication
Username
Current Service Status
Description
Status of the 3G/4G modem:
•
Online—The 3G/4G modem is powered on.
•
Offline—The 3G/4G modem is powered off or in low
power mode. The cellular Ethernet interface is unavailable.
Parameter description template of the 3G/4G modem.
PDP status of the 3G/4G modem:
•
ACTIVE—The parameter description template is already
configured.
•
UNDEFINED—The parameter description template is not
configured yet. The cellular Ethernet interface is
unavailable. You must use the profile create command to
create the template, namely, the profile.
PDP type (displayed only when Profile 1 = ACTIVE):
•
IPv4.
•
IPv6.
•
PPP (transparent transmission).
PDP header compression mode:
•
ON—Enables PDP header compression.
•
OFF—Disables PDP header compression.
PDP data compression mode:
•
ON—Enables PDP data compression.
•
OFF—Disables PDP data compression.
Packet session status:
•
Active—The 3G/4G modem is transmitting data through
PPP.
•
Inactive—The 3G/4G modem is physically down.
Authentication mode specified in the profile.
Username assigned by the authenticator.
Service status of the 3G/4G modem:
•
Service available—The modem provides services correctly.
•
Limited—The modem provides limited services. The cellular
Ethernet interface is unavailable.
•
No service—The modem cannot provide services. The
cellular Ethernet interface is unavailable.
•
Low power—The modem is in low power mode. The
cellular Ethernet interface is unavailable.
•
Limited Regional Service—The modem provides limited
regional services.
•
Unknown—Unknown service status.
86