Default; Description - HP MSR series Command Reference Manual

The expected bandwidth is used for bandwidth monitoring of the network management, but does not
affect the actual bandwidth of the interface.
Examples
# Set the expected bandwidth to 50 kbps for interface Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] bandwidth 50

default

Use default to restore the default settings for the interface.
Syntax
default
Views
Serial interface view, AUX interface view, AM interface view, Cellular interface view, E1-F interface view,
T1-F interface view, ISDN BRI interface view, CE3 interface view, CT3 interface view, CE1/PRI interface
view, CT1/PRI interface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings of serial interface serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] default
This command will restore the default settings. Continue? [Y/N]:y

description

Use description to set the description for the interface.
Use undo description to restore the default.
Syntax
description text
undo description
45