HP MSR series Command Reference Manual page 305

[Sysname] controller cpos 1/0
[Sysname-Cpos1/0]
default
Use default to restore the default settings for a CPOS interface.
Syntax
default
Views
CPOS interface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings of CPOS 1/0.
<Sysname> system-view
[Sysname] controller cpos 1/0
[Sysname-Cpos1/0] default
This command will restore the default settings. Continue? [Y/N]:y
description
Use description to set the description for a CPOS interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of a CPOS interface is interface name Interface, for example, Cpos2/0 Interface.
Views
CPOS interface view
Default command level
2: System level
296