HP MSR series Command Reference Manual page 63

Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: Displays information about a specified AM interface.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about interfaces in the DOWN state and the causes. If you do not specify
this keyword, the command displays information about interfaces in all states.
description: Displays complete interface descriptions. If you do not specify this keyword, the command
displays only the first 27 characters of interface descriptions.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify the analogmodem keyword, this command displays information about all interfaces
on the device.
If you specify the analogmodem keyword without the interface-number argument, this command displays
information about all existing AM interface.
Examples
# Display detailed information about interface AM 2/0.
<Sysname> display interface analogmodem 2/0
Analogmodem2/0 current state: UP
Line protocol current state: UP
Description: Analogmodem2/0 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is 6.6.5.5/24 Primary
Link layer protocol is PPP
LCP opened, IPCP opened
Physical is Analogmodem2/0, baudrate: 64000
Output queue : (Urgent queuing : Size/Length/Discards)
Output queue : (Protocol queuing : Size/Length/Discards)
Output queue : (FIFO queuing : Size/Length/Discards)
Physical layer is asynchronous, Baudrate is 57600 bps
Phy-mru is 1700
Last clearing of counters: Never
Last 300 seconds input rate 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec
Last 300 seconds output rate 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec
Input: 0 packets, 0 bytes
0/100/0
0/75/0
54
0/500/0