HP MSR series Command Reference Manual page 309

Default command level
1: Monitor level
Parameters
cpos-number: CPOS interface number.
e1-number: Number of an E1 channel on the specified CPOS interface, in the range of 1 to 63.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command displays errors and alarms that occurred to lower-order paths and E1 frames.
Examples
# Display the status information of E1 channel 1 on CPOS 1/0.
<Sysname> display controller cpos 1/0 e1 1
Cpos1/0 current state: DOWN
Description : Cpos1/0 Interface
Lower order path:
TxFlag: J2: ""
RxFlag: J2: "
Alarm:
Error:
CE1 1 (1-1-1-1) is down
Frame-format: NO-CRC4,
Alarm:
Error:
Table 40 Command output
Field
Cpos1/0 current state
Description
Lower order path
TxFlag
RxFlag
Alarm
Error
CE1 1 (1-1-1-1) is down
LP-C2: 2
LP -C2: 7
LP-AIS LP-RDI LP-RFI
1164 BIP2, 2047 FEBE
clock: slave,
AIS LFA Red
0 Fer
LP-C2-Mismatched LP-J2-Unstable
loopback: none
Description
Current physical state of the CPOS interface.
Interface description.
Alarm and error statistics of the lower order E1 path.
Sent overhead bytes.
Received overhead bytes.
Alarm statistics.
Error statistics.
Current physical state of E1 channel 1 of CPOS 1/0. 1-1-1-1
represents in order VC-4 number, TUG-3 number, TUG-2 number,
and TU-12 number for an E1 channel.
300