Show Lacp - Dell PowerConnect 7000 Series Reference Manual

User Guidelines
No specific guidelines.
Example
console#show interfaces port-channel
Channel Ports
------- ------------------
Po1 Inactive: Gi1/0/3
Po2 No Configured Ports Static
Hash Algorithm Type
1 - Source MAC, VLAN, Ethertype, source module and port ID
2 - Destination MAC, VLAN, Ethertype, source module and port ID
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
5 - Source/Destination MAC, VLAN, Ethertype, source MODID/port
6 - Source/Destination IP and source/destination TCP/UDP port
7 - Enhanced hasing mode

show lacp

Use this command in Privileged EXEC mode to display LACP information
for Ethernet ports.
Syntax
show lacp {gigabitethernet
number | tengigabitethernet unit/slot/port [{parameters | statistics}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
ChType Hash Algorithm Type min-Links
------- ------------------- ---------
Dynamic 3
3
unit/slot/port
| port-channel
port-channel-
Port Channel Commands
1
1
635