Aaa Authentication Enable - Dell PowerConnect 7000 Series Reference Manual
Systems cli reference guide
Hide thumbs
Also See for PowerConnect 7000 Series:
- Stacking instructions (37 pages) ,
- Technical white paper (34 pages)
Table of Contents
Advertisement
console(config)#aaa authentication dot1x default
radius
aaa authentication enable
Use the aaa authentication enable command in Global Configuration mode
to set authentication for accessing higher privilege levels. To return to the
default configuration, use the no form of this command.
Syntax
aaa authentication enable {default |
no aaa authentication enable {default |
•
default — Uses the listed authentication methods that follow this
argument as the default list of methods, when using higher privilege levels.
list-name — Character string used to name the list of authentication
•
methods activated, when using access higher privilege levels. (Range: 1-15
characters)
method1 [ method2 ...] — Specify at least one from the following table:
•
Keyword
enable
line
none
radius
tacacs
Default Configuration
The default enable list is enableList. It is used by console, telnet, and SSH
and only contains the method none.
Command Mode
Global Configuration mode
242
AAA Commands
Source or destination
Uses the enable password for authentication.
Uses the line password for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
list-name
method1
}
list-name
}
method2
[
...]
Advertisement
Table of Contents
