Show Switchport Voice - Dell PowerConnect 7000 Series Reference Manual
Systems cli reference guide
Hide thumbs
Also See for PowerConnect 7000 Series:
- Stacking instructions (37 pages) ,
- Technical white paper (34 pages)
Table of Contents
Advertisement
show switchport voice
Use the show switchport voice command to show the status of Auto-VoIP on
an interface or all interfaces.
Syntax
show switchport voice [gigabitethernet
channel-number | tengigabitethernet unit/slot/port ]
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example shows command output when a port is specified:
console#show switchport voice
Interface
---------
Gi1/0/1
Gi1/0/2
Gi1/0/3
Gi1/0/4
Gi1/0/5
Gi1/0/6
Gi1/0/7
312
Auto-VoIP Commands
Auto VoIP Mode Traffic Class
-------------- -------------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
unit/slot/port
| port-channel
6
6
6
6
6
6
6
port-
Advertisement
Table of Contents
