Sdm Templates - Dell PowerConnect 7000 Series Reference Manual
Systems cli reference guide
Hide thumbs
Also See for PowerConnect 7000 Series:
- Stacking instructions (37 pages) ,
- Technical white paper (34 pages)
Table of Contents
Advertisement
a.
For the meaning of each Mode abbreviation, see Mode Types on page 79.
SDM Templates
Command
sdm prefer
show sdm prefer
a.
For the meaning of each Mode abbreviation, see Mode Types on page 79.
Serviceability Tracing
Command
debug arp
debug auto-voip
debug clear
debug console
debug dot1x
debug igmpsnooping
debug ip acl
debug ip dvmrp
debug ip igmp
debug ip mcache
debug ip pimdm
Description
Changes the template that will be active after
the next reboot.
Views the currently active SDM template and
its scaling parameters, or views the scaling
parameters for an inactive template.
Description
Enables tracing of ARP packets.
Enables Auto VOIP debug messages.
Disables all debug traces.
Enables the display of debug trace output on
the login session in which it is executed.
Enables dot1x packet tracing.
Enables tracing of IGMP Snooping packets
transmitted and/or received by the switch.
Enables debug of IP Protocol packets matching
the ACL criteria.
Traces DVMRP packet reception and
transmission.
Traces IGMP packet reception and
transmission.
Traces MDATA packet reception and
transmission.
Traces PIMDM packet reception and
transmission.
Command Groups
a
Mode
GC
PE
a
Mode
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE
153
Advertisement
Table of Contents
